carfobbattery

Buick Skylark key fob battery

1 of the 3 model years listed for the Buick Skylark have a proven battery. The most common answer is CR2032. Rows below run oldest to newest; a year can appear twice when the car came with more than one kind of key.

  1. 1996Unknown

    Not confirmed yet

  2. 1997Remote (separate)

    Not confirmed yet

  3. 1998Remote (separate)

    CR2032

    FCC ID ABO1502T

    Owner's manual: americankeysupply.com and assets.gm.com (checked Nov 2, 2026)

    Manual text: “Use one 3-volt, CR2032, or equivalent, type battery.”

    Find CR2032 on Amazon

Changing the battery

Separate remote fob

  1. A separate fob has no key blade inside, so it opens with nothing but a coin or a small screwdriver.
  2. Look for a screw on the back or a notch on the edge. Remove the screw if present, then twist a coin in the notch to split the case.
  3. Replace the cell, keeping the + side where it was, and check the small metal tab still touches it.
  4. Close the fob and test it. If it does not work, open it again and check the cell is seated flat.

A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.

If a child might have swallowed a coin cell, treat it as an emergency and get to a hospital right away.

Other Buick models