Dodge Dart key fob battery
Every model year listed for the Dodge Dart has a proven battery. The most common answer is CR2032. Rows below run oldest to newest; a year can appear twice when the car came with more than one kind of key.
- 2013Remote (separate)
CR2032
FCC ID M3N32297100Owner's manual: carmanualsonline.info (checked Nov 1, 2026)
Manual text: “The recommended replacement battery is CR2032.”
Find CR2032 on Amazon - 2013Smart key
CR2032
FCC ID M3N-40821302Owner's manual: carmanualsonline.info (checked Nov 1, 2026)
Manual text: “The recommended replacement battery is CR2032.”
Find CR2032 on Amazon - 2014-2016Remote (separate)
CR2032
FCC ID M3N32297100Two sites agree: uhs-hardware.com and energizer.com (checked Nov 1, 2026)
Find CR2032 on Amazon - 2014-2016Smart key
CR2032
FCC ID M3N-40821302Two sites agree: uhs-hardware.com and energizer.com (checked Nov 1, 2026)
Find CR2032 on Amazon
Changing the battery
Separate remote fob
- A separate fob has no key blade inside, so it opens with nothing but a coin or a small screwdriver.
- Turn it over: some older fobs use one small screw, newer ones just clip. Pry at the seam once any screw is out.
- Replace the cell, keeping the + side where it was, and check the small metal tab still touches it.
- Close the fob and test it. If it does not work, open it again and check the cell is seated flat.
A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.
Smart key (push-button start)
- Most push-button fobs hide a metal backup key. Press or slide its catch and draw the key out first.
- The gap left by the metal key usually has a pry point. A slow twist with a thin flat tool (tape on the tip saves the plastic) opens the two halves.
- Before you take the old cell out, look at its face. Put the new cell in with the same side showing, and avoid touching both faces at once.
- Snap the halves back together, slide the metal key home, and press each button, then try the start button from the driver's seat.
A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.
Coin cells are a choking and burn hazard for children. Store the spares in their original pack, out of reach.