Hyundai Azera key fob battery

Separate remote fob

1. The remote is a small standalone unit. You will not need to touch the ignition key at all.
2. Look for a screw on the back or a notch on the edge. Remove the screw if present, then twist a coin in the notch to split the case.
3. Lift the old coin cell out and press the new one in with matching orientation.
4. Reassemble and test from a short distance.

A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.

Smart key (push-button start)

1. Find the small release on the edge or back of the fob and hold it while you pull out the metal emergency key.
2. Look inside the empty key slot for a notch. Put the tip of the metal key or a small flat screwdriver wrapped in tape there and twist gently until the shell splits.
3. Note which side of the old coin cell faces up (usually the side with the writing), lift it out with a plastic tool, and press the new one in the same way.
4. Snap the halves back together, slide the metal key home, and press each button, then try the start button from the driver's seat.

Hyundai smart keys usually have a button that releases the mechanical key; a flat tool in the gap then opens the case.

A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.