Mitsubishi Outlander Sport key fob battery
10 of the 15 model years listed for the Mitsubishi Outlander Sport have a proven battery. The most common answer is CR1620. Rows below run oldest to newest; a year can appear twice when the car came with more than one kind of key.
- 2011-2013Key-head remote
CR1620
FCC ID OUCJ166NTwo sites agree: bestkeysupply.com and uhs-hardware.com (checked Nov 2, 2026)
Find CR1620 on Amazon - 2011-2013Smart key
CR2032
FCC ID OUC644M-KEY-NTwo sites agree: uhs-hardware.com and noblekeysupply.com (checked Nov 1, 2026)
Find CR2032 on Amazon - 2014-2015Key-head remote
CR1620
FCC ID OUCJ166NTwo sites agree: bestkeysupply.com and uhs-hardware.com (checked Nov 2, 2026)
Find CR1620 on Amazon - 2016-2017Key-head remote
CR1620
FCC ID OUCJ166NTwo sites agree: bestkeysupply.com and uhs-hardware.com (checked Nov 2, 2026)
Find CR1620 on Amazon - 2016-2017Smart key
CR2032
FCC ID OUC644M-KEY-NTwo sites agree: uhs-hardware.com and noblekeysupply.com (checked Nov 1, 2026)
Find CR2032 on Amazon - 2018Key-head remote
CR1620
FCC ID OUCJ166NOwner's manual: bestkeysupply.com and manua.ls (checked Nov 2, 2026)
Manual text: “Coin type battery CR1620”
Find CR1620 on Amazon - 2018-2020Smart key
CR2032
FCC ID OUC644M-KEY-NTwo sites agree: americankeysupply.com and uhs-hardware.com (checked Nov 2, 2026)
Find CR2032 on Amazon - 2019Key-head remote
CR1620
FCC ID OUCJ166NTwo sites agree: bestkeysupply.com and uhs-hardware.com (checked Nov 2, 2026)
Find CR1620 on Amazon - 2022Key-head remote
Not confirmed yet
- 2022Smart key
Not confirmed yet
- 2023-2026Smart key
Not confirmed yet
Changing the battery
Key with remote in the head
- Here the key blade and remote are one piece. You open the plastic head, not the blade.
- Work a thin flat tool into the seam near the blade and twist; go round slowly if it does not open at once.
- Replace the cell with the same face showing, and make sure the rubber keypad sits flat before closing.
- Close the head, check there is no gap, and try the buttons.
A CR1620 is 16 mm across and 2.0 mm thick. It is easy to confuse with the 20 mm CR20xx sizes, which will not fit.
Smart key (push-button start)
- Find the small release on the edge or back of the fob and hold it while you pull out the metal emergency key.
- Use the slot where the metal key sat. Twist, do not lever hard, and work along the seam until the halves separate.
- Before you take the old cell out, look at its face. Put the new cell in with the same side showing, and avoid touching both faces at once.
- Close the case until it clicks all the way round, put the metal key back, then try the buttons and a push-button start.
A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.
Coin cells are a choking and burn hazard for children. Store the spares in their original pack, out of reach.