carfobbattery

Nissan Murano CrossCabriolet key fob battery

1 of the 3 model years listed for the Nissan Murano CrossCabriolet have a proven battery. The most common answer is CR2032. Rows below run oldest to newest; a year can appear twice when the car came with more than one kind of key.

  1. 2011Smart key

    Not confirmed yet

  2. 2013Smart key

    Not confirmed yet

  3. 2014Smart key

    CR2032

    FCC ID KR55WK48903

    Two sites agree: uhs-hardware.com and energizer.com (checked Nov 1, 2026)

    Find CR2032 on Amazon

Changing the battery

Smart key (push-button start)

  1. Find the small release on the edge or back of the fob and hold it while you pull out the metal emergency key.
  2. The gap left by the metal key usually has a pry point. A slow twist with a thin flat tool (tape on the tip saves the plastic) opens the two halves.
  3. Before you take the old cell out, look at its face. Put the new cell in with the same side showing, and avoid touching both faces at once.
  4. Reassemble, refit the emergency key, and check that the car sees the fob when you press start.

Nissan Intelligent Keys normally hold a mechanical key behind a release knob. With the key out, a small screwdriver in the slot separates the halves.

A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.

Coin cells are a choking and burn hazard for children. Store the spares in their original pack, out of reach.

Other Nissan models