Kia Sedona key fob battery
10 of the 20 model years listed for the Kia Sedona have a proven battery. The most common answer is CR2032. Rows below run oldest to newest; a year can appear twice when the car came with more than one kind of key.
- 2002Unknown
Not confirmed yet
- 2003-2004Remote (separate)
CR2032
FCC ID PLNBONTEC-T009Two sites agree: uhs-hardware.com and bestkeysupply.com (checked Nov 1, 2026)
Find CR2032 on Amazon - 2005Remote (separate)
CR2032
FCC ID PLNBONTEC-T009Two sites agree: uhs-hardware.com and bestkeysupply.com (checked Nov 1, 2026)
Find CR2032 on Amazon - 2006-2008Unknown
Not confirmed yet
- 2009-2013Remote (separate)
Not confirmed yet
- 2014Remote (separate)
Not confirmed yet
- 2015-2018Flip key
CR2032
FCC ID TQ8-RKE-4F19Two sites agree: uhs-hardware.com and americankeysupply.com (checked Nov 1, 2026)
Find CR2032 on Amazon - 2015-2018Smart key
CR2032
FCC ID SY5YPFGE04Two sites agree: uhs-hardware.com and bestkeysupply.com (checked Nov 1, 2026)
Find CR2032 on Amazon - 2018-2021Smart key
CR2032
FCC ID SY5YPFGE06Two sites agree: uhs-hardware.com and americankeysupply.com (checked Nov 1, 2026)
Find CR2032 on Amazon - 2019-2021Flip key
CR2032
FCC ID TQ8-RKE-4F19Two sites agree: uhs-hardware.com and bestkeysupply.com (checked Nov 1, 2026)
Find CR2032 on Amazon
Changing the battery
Separate remote fob
- A separate fob has no key blade inside, so it opens with nothing but a coin or a small screwdriver.
- Find the slot along the edge and turn a coin in it. Go slowly so the clips do not snap.
- Replace the cell, keeping the + side where it was, and check the small metal tab still touches it.
- Reassemble and test from a short distance.
A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.
Flip key
- Fold the blade out so it is out of the way, or keep it folded if your case opens from the side; the battery sits in the plastic body, not the blade.
- Find the seam or small slot on the body (often at the end away from the blade) and twist a coin or small flat screwdriver in it until the cover lifts.
- Lift the cell out with a plastic tool and press in the new one with the + side matching.
- Clip the body closed, fold the blade, and test the buttons from a few steps away.
A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.
Smart key (push-button start)
- Most push-button fobs hide a metal backup key. Press or slide its catch and draw the key out first.
- Use the slot where the metal key sat. Twist, do not lever hard, and work along the seam until the halves separate.
- Pop the old battery out with a toothpick or plastic pick, not a metal blade, and seat the new one with the + side matching the old one.
- Reassemble, refit the emergency key, and check that the car sees the fob when you press start.
Kia smart keys usually free the mechanical key with a button, and the case opens at the gap it leaves.
A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.
Coin cells are a choking and burn hazard for children. Store the spares in their original pack, out of reach.